products

2
Yes
None
1
1000000
Name...
/products/
Thumbnail

Categories:

Sub-Categories:

Hospital Beds
ICU Bed - Electric (GM 7000 A)
ICU Bed - Electric (GM 7000 A) Image
  • Frame work made of Rectangular M. S. Tube
  • ABS Mattress platform in four sections
  • Backrest, Kneerest, TB/ RTB and Hi-Low positions
  • Obtained by hand remote system and nurse panel
  • ABS mounted head and foot panels
  • ABS tuck away safety side Railings
  • Telescopic I. V. Rod with 4 Locations
  • Bed Mounted on 125mm Dia castor with central Braking system
  • Overall Size: 210L X 90W X 57-78H cm
  • Finish: Epoxy powder Coated
  • Chair Position
  • Under bed light
  • Electric CPR System
  • Positioning lock System
  • Head X-Ray translucent
  • Bed with 4 section mattress

Technical Specifications:

  • Head Position 0° – 85°
  • Knee Position 0° – 35°
  • Trendlenburg / RTB – 15° to +15°
  • Height 570 mm – 780mm
ICU Bed - Electric (ABS Panels & ABS Side Railings)(GM 7001)
ICU Bed - Electric (ABS Panels & ABS Side Railings)(GM 7001) Image
  • Advance linear actuator system (04 Pcs Motor, 01 Pc Control box, 01 Pc Handset)
  • Four Pieces individual ABS Molded Side-railings
  • ABS Molded Head and Foot Panel with locking and corner buffer
  • Framework Made-up of M. S. Tubes
  • 4 section top made-up of Oval perforated CRCA M. S. Sheet
  • Bed Mounted on 5” Central Locking Castors, Durable and Quit
  • S. S. Telescopic I. V. Rod with 4 Hook and at 4 Locations, Holder for Urine Bag
  • Sitting position adjustable
  • Finish: Pre-treated & Epoxy Powder Coated
  • Overall Approx Size: 2090L x 910W x 570-770 mm

Positions Obtained by Hand Remote:

  • Hi-Low Backrest elevation Knee-rest elevation
  • Trendlenburg / Reverse Trendlenburg Optional: 4 Section Mattress
  • Manual Chair Position
ICU Bed - Electric (Economy Model) - GM 7002
ICU Bed - Electric (Economy Model) - GM 7002 Image
  • ABS Molded Head & Foot Bows
  • Four Independent Electric Motors
  • Collapsible Side rails with Safety Lock
  • 4 Section Perforated CRC Sheet
  • Removal and Lockout ABS Head & Foot Board
  • Mounted on 125mm Dia castor with brakes
  • Drainage Bag Hooks
  • 4 I. V. Pole storage located on all sides of the bed
  • Finish: Epoxy Powder Coated
  • Pre-treated with seven tank phosphating process
  • Available with removable I. V. Pole

Positions:

  • Back Rest, Knee Rest, Trend / Reverse Trendlenburg
  • Hi-Low
  • Manual Chair Position
Semi Fowler Bed (Deluxe) (GM 7013)
Semi Fowler Bed (Deluxe) (GM 7013) Image
  • Frame work made of Rectangular M.S. Tube
  • 2 Section Top made of Perforated M. S. Sheet
  • Backrest, Section Maneuver by screw Handle from Foot end
  • SS Head & Foot Bow with Laminated Panels
  • 4 Locations for I. V. Rod
  • Overall Size: 206 L X 90 W X 60H cm
  • Finish: Epoxy Powder Coated
ICU Bed - Semi Electric (GM 7000)
ICU Bed - Semi Electric (GM 7000) Image
  • Four Pieces individual side-rails, ABS Molded
  • ABS Head and Foot Panel with locking and corner buffer
  • Framework Made-up of M.S. Tubes
  • 4-Section Top made Oval perforated CRCA M.S. Sheet
  • Bed Mounted on 5” Castor, 2 with brakes
  • S. S. Telescopic I. V. Rod with 4 Hook and at 4 locations
  • Holder for Urine Bag
  • Finish: Pre-treated Epoxy Powder Coated
  • Overall approx Size: 2090L X 910W X 625-820H mm
  • Position Obtained by hand remote: Backrest
  • Position Obtained by smooth crank system with foldable handle
  • Hi-Low, Knee rest elevation
  • Trendelenburg/Reverse Trendelenburg

Optional:

  • 4 Section Mattress
GM 7015 Hospital Semi Fowler Bed (Standard)
GM 7015 Hospital Semi Fowler Bed (Standard) Image
  • Frame work made of Rectangular/Square M. S. Tube
  • 2 Section Top made of Perforated CRCA M. S. Sheet Backrest, Section Maneuver by screw           Handle from Foot end Tubular Head & Foot Bows of unequal height
  • 4 Locations for I. V. Rod
  • Overall Size: 206L X 90W X 60H cm
  • Finish: Pre-treated Epoxy powder Coated
GM 7016 Ortho Bed
GM 7016 Ortho Bed Image
  • Size: 2030L X 900 W X 530Hmm
  • Operated by screw mechanism
  • Two section foot end
  • Fully stainless steel
  • Provision for I. V. Pole
  • Urine bag hook provision on both side with head-up position (Trendelenberg)
  • Castors in high strength engineering plastic
GM 7017 Hospital Bed Plain
GM 7017 Hospital Bed Plain Image
  • Frame work made of Rectangular/Square M. S. Tube
  • Top made of perforated CRCA MS sheet
  • Tubular Head & Foot Bows of equal height
  • 4 Locations for I. V. Rod
  • Overall Size: 206L X 90W X 60Hcm
  • Finish: Pre-treated Epoxy Powder Coated
GM 7018 Hospital Bed Pediatric
GM 7018 Hospital Bed Pediatric Image
  • Main frame of rectangular pipe
  • Perforated CRCA sheet top
  • Tubular head & foot bow of equal height with vertical tube supports on PVC stumps
  • Size: 206L X 90W X 60Hcm
  • Finish: Pre-treated & Epoxy powder Coated
GM 7031 Luxurious Accompanier’s Chair
GM 7031 Luxurious Accompanier’s Chair Image
  • Overall Size: Chair Position: 770 X 680 X 1125 mm Bed Position: 2050 X 680 X 550 mm
  • Mild steel tubular frame work mounted
  • Easily convertible to chair
  • Castors to facilitate couch position
  • High quality durable mattress in three sections
  • Compact construction to save space
  • Finish: Pre-treated & Epoxy powder Coated
GM 7032 Attendant Bed Cum Chair
GM 7032 Attendant Bed Cum Chair Image
  • MS Tubular frame work mounted on PVC stumps
  • Pull-Out Design for Easy Transforming Recliner into Bed
  • Overall Size: 188L x 50L x 40H cm
  • Finish: Pre-treated & Epoxy Powder Coated
Hospital Bed Semi Fowler (ABS Panel) (GM 7012)
Hospital Bed Semi Fowler (ABS Panel) (GM 7012) Image
  • Frame work made of Rectangular M. S. Tube
  • 2 Section Top made of Perforated M. S. Sheet
  • Backrest, Section Maneuver by screw Handle from Foot end
  • ABS Mounted Head & Foot Panels
  • 4 Locations for I. V. Rod
  • Overall Size: 206L X 90W X 60H cm
  • Finish: Epoxy Powder Coated
Hospital Bed Fowler (S. S. Bows) (GM 7011)
Hospital Bed Fowler (S. S. Bows) (GM 7011) Image
  • Frame work made of Rectangular M. S. Tube
  • 4 Section Top made of Perforated M. S. Sheet
  • Detachable S. S. Head and Foot Bow fitted with laminated panels
  • Telescopic I. V. Rod with 4 Locations
  • Bed Mounted on 100mm Dia castor 2 with brakes
  • Overall Size: 206L X 90W X 60H cm
  • Finish: Pre-treated & Epoxy powder Coated
  • Position: Backrest & Kneerest
ICU Bed - Semi Electric (GM 7003)
ICU Bed - Semi Electric (GM 7003) Image
  • Four Pieces individual side-rails, ABS Molded
  • ABS Head and Foot Panel with locking and corner buffer
  • Framework Made-up of M.S. Tubes
  • 4-Section Top made Oval perforated CRCA M.S. Sheet
  • Bed Mounted on 5” Castor, 2 with brakes
  • S. S. Telescopic I. V. Rod with 4 Hook and at 4 locations
  • Holder for Urine Bag
  • Finish: Pre-treated Epoxy Powder Coated
  • Overall approx Size: 2090L X 910W X 625-820H mm
  • Position Obtained by hand remote: Backrest
  • Position Obtained by smooth crank system with foldable handle
  • Hi-Low, Knee rest elevation
  • Trendelenburg/Reverse Trendelenburg

Optional:

  • 4 Section Mattress
ICU Bed Electric (ABS Panels & ABS Side Railings)-GM 7004
ICU Bed Electric (ABS Panels & ABS Side Railings)-GM 7004 Image
  • Advance Linear Actuator system 04 Pcs Motor, 01 Pc Control Box, 01 Pc Handset
  • Four Pieces individual side rails, ABS Molded
  • ABS Molded Head and Foot panel with locking and corner buffer
  • Frame work made of Rectangular M. S. Tube
  • 4 section top made up of Oval perforated CRCA MS Sheer Bed Mounted on 5″ Dia Castor
  • Holder for Urine bag
  • S. S. Telescopic IV Rod with Locations
  • Overall Approx Size: 2090L X 910W X 570-770H mm
  • Finish: Pre-treated & Epoxy Powder Coated

Positions obtained by hand Remote:

  • Hi-Low
  • Backrest elevation
  • Knee rest elevation
  • Trendelenburg/Reverse Trendelenburg

Optional:

  • 4 Section Mattress
  • X-Ray Translucent Backrest
  • Manual CPR for Backrest
Hospital Fowler Bed (Electric) (GM 7005)
Hospital Fowler Bed (Electric) (GM 7005) Image
  • Advance linear actuator system
  • 4 set individual detachable ABS side railings
  • ABS Molded Head and Foot Panel with locking
  • Framework Made-up of M. S. Tubes
  • 4 section top made-up of Oval perforated CRCA M. S. Sheet
  • Bed Mounted on 4” Castors, 2 with brakes
  • Finish: Pretreated & Epoxy Powder Coated
  • Overall Approx. Size: 2090L X 910W X 600H mm

Positions Obtained by Hand Remote:

  • Backrest elevation
  • Knee rest elevation
ICU Bed - Mechanical, 4 Functions (GM 7006)
ICU Bed - Mechanical, 4 Functions (GM 7006) Image
  • Framework made of Rectangular M. S. Tube
  • Section Top made of Perforated M. S. Sheet
  • Maneuvered by Separate screw from Foot end
  • ABS mounted head and foot panels
  • ABS tuck away safety side Railings
  • Telescopic I. V. Rod with Four Locations
  • Bed Mounted on 125mm Dia castor with central Braking system
  • Overall Size: 210L X 90W X 60-80H cm
  • Finish: Epoxy powder Coated
  • Provision for I. V. pole on all sides of the bed

Positions:

  • Backrest
  • Knee rest
  • TB/ RTB
  • Hi-Low
ICU Bed - Mechanical (ABS Panels, Collapsible Railing) (GM 7007)
ICU Bed - Mechanical (ABS Panels, Collapsible Railing) (GM 7007) Image
  • Collapsible Side rails with Safety Lock
  • 4-Section Perforated CRC Sheet
  • Removal and Lockout ABS Head & Foot Board
  • Mounted on 125mm Dia castor with brakes
  • ABS Corner Bumper
  • Drainage Bag Hooks
  • Provision for I.V. pole on all sides of the bed.
  • Available with removable I. V. Pole
  • Pre-treated with seven tank phosphating process and Epoxy Powder Coated

Positions:

a   Backrest

b   Kneerest

c   Trend/Reverse Trendlenburg

d   Hi-Low

ICU Bed - Mechanical (Economy Model, S. S. Bows) (GM 7008)
ICU Bed - Mechanical (Economy Model, S. S. Bows) (GM 7008) Image
  • Overall approx Size: 2100L x 900W x 600-800H mm
  • Framework made of Rectangular M. S. Tube
  • Stainless Steel Head & Foot Bows with Laminated Panels
  • Aluminum Collapsible Safety side railings
  • Telescopic I. V. Rod with 4 Locations
  • Bed Mounted on 125mm Deluxe Castors two with brakes
  • Pre-treated with seven tank phosphating process and Epoxy Powder Coated

Positions:

  • Backrest
  • Knee rest
  • Trendelenburg / Reverse Trendelenburg
  • Hi-Low
Hospital Bed Fowler (ABS Panels & ABS Side Railing)(GM 7009)
Hospital Bed Fowler (ABS Panels & ABS Side Railing)(GM 7009) Image
  • Framework made of Rectangular M. S. Tube
  • 4 Section Top made of Perforated M. S. Sheet
  • Backrest & Knee rest
  • ABS mounted head and foot panels
  • ABS tuck away safety side Railings
  • Telescopic I. V. Rod with 2 Locations
  • Bed Mounted on 100mm. Dia castor 2 with brakes
  • Overall Size: 210L X 90W X 60H cm
  • Finish: Epoxy powder Coated
  • Position: Backrest & Knee rest
ICU Bed Fowler (ABS Panels) (GM 7010)
ICU Bed Fowler (ABS Panels) (GM 7010) Image
  • Frame work made of Rectangular M. S. Tube
  • 4 Section Top made of Perforated M. S. Sheet
  • Backrest, Kneerest, Positions Maneuvered by Separate screw from Foot End
  • ABS mounted head and foot panels
  • Telescopic I. V. Rod with 2 Locations
  • Bed Mounted on 100mm Dia castor 2 with brakes
  • Overall Size: 206L X 90W X 60H cm
  • Finish: Epoxy powder Coated
GM 7033 Attendant Bed
GM 7033 Attendant Bed Image
  • Frame work made of Rectangular / Square M. S. Tube
  • 5 cm Foam Padded top covered with rexine
  • Leg fitted with PVC stumps
  • Overall Size: 180L X 60W X 46H cm
  • Finish: Pre-treated Epoxy powder Coated
Hospital Bed Accessories
GM 7051 Mosquito Net Poles
GM 7051 Mosquito Net Poles Image
  • 4 Vertical M. S. Tube of 19 mm
  • 2 Longitudinal & Two transverse
  • Tubes of 5.8 mm knocked down condition
  • Pre-treated and Epoxy Powder Coated
GM 7052 Mattress for Hospital Bed
GM 7052 Mattress for Hospital Bed Image
  • 10 cm thick, 32/40 density foam mattress covered with rexine closed with zip at one end

A –  Single mattress for plain beds

B –  Two section mattress for Semi-Fowler beds

C –  Three section mattress for Fowler / I.C.U. Beds

GM 7053 ABS Tuck Away Railings
GM 7053 ABS Tuck Away Railings Image
  • Comes in durable ABS material finish and provides for enhanced interior safety support as well as add to the decor needs of the surrounding decor
GM 7054 IV Rod For Hospital Bed
GM 7054 IV Rod For Hospital Bed Image
  • A telescopic stainless steel infusion stand with a range of height adjustable from 110 to 195 cm, adapted for insertion in to the  lifting pole holder at the head end of the bed
  • Can be locked to prevent unwanted rotating
GM 7055 Lifting Pole
GM 7055 Lifting Pole Image
  • S. S. Tubular pole fitted with hand grip
  • Easy fitted back side of the head bow
  • Pole can be mounted on either side of the bed and allows the occupant to reposition

 

GM 7056 Collapsible Side Railings
GM 7056 Collapsible Side Railings Image
  • M. S.  Tubular  constructions
  • Two  S.  S.  Rod  of  side  inside  M.  S.  Bushes,  lockable with  knob  Pre- treated
O.T Lights
GM 7071 Light Single Dome 4 Reflector
GM 7071 Light Single Dome 4 Reflector Image
  • Luminance                                 :               1,25,000 Lux
  • Spot Diameter                           :               100 – 150 mm
  • Depth Illumination                 :               10 – 15  cm
  • Colour Temp.                             :               4800-4850 K
  • Colour Rendering Index       :               91 Ra
  • Focusing                                       :               Manual
  • LED Average Life                     :               >50000 Hrs
  • Number of LED                        :               76
  • Diameter of Light                    :               580 mm
  • Intensity Control                     :               10~100 Digital
  • Power Supply                             :               220V/50Hz AC
  • Power Consumption              :               40 Watts
  • Special Function                      :               Memory
GM 7072 Light Single Dome 3 Reflector
GM 7072 Light Single Dome 3 Reflector Image
  • Luminance                          :               1,00,000 Lux
  • Spot Diameter                   :               100 – 180 mm
  • Depth Illumination          :               15 – 21 cm
  • Colour Temp.                     :               4000-4850 K
  • Colour Rendering Index                :               91 Ra
  • Focusing                              :               Manual
  • LED Average Life              :               >50000 Hrs
  • Number of LED                 :               57
  • Diameter of Light             :               580mm
  • Intensity Control              :               10~100 Digital
  • Power Supply                    :               220V/50Hz
  • Power Consumption      :               35 Watts
  • Special Function               :               Memory
GM 7073 Light Single Dome 3 Reflector
GM 7073 Light Single Dome 3 Reflector Image
  • Luminance                                    :               1,50,000 Lux
  • Spot Diameter                              :               100 – 180 mm
  • Depth Illumination                    :               10 – 15 cm
  • Colour Temp.                                :               4000-4850 K
  • Colour Rendering Index          :               91 Ra
  • Focusing                                          :               Manual
  • LED Average Life                        :               >50000 Hrs
  • Number of LED                           :               111
  • Diameter of Light                       :               600 mm
  • Intensity Control                        :               10~100 Digital
  • Power Supply                               :               220V/50Hz AC
  • Power Consumption                :               40Watts
  • Special Function                        :               Memory
GM 7074 Led Examination Light
GM 7074 Led Examination Light Image
  • Luminance                              :               45,000 Lux
  • Spot Diameter                        :               100 – 180 mm
  • Depth Illumination              :               10 – 15 cm
  • Colour Temp.                          :               4000 – 4850 K
  • Colour Rendering Index    :               91 Ra
  • LED Average Life                  :               >50000  Hrs
  • Number of LED                     :               19
  • Diameter of Light                 :               150 mm
  • Intensity Control                  :               10~100 Digital
  • Power Supply                          :               220V/50Hz AC
  • Power Consumption           :               12 Watts
  • Special Function                   :               Memory
GM 7075 LED OT Light Ceiling 3 Reflector
GM 7075 LED OT Light Ceiling 3 Reflector Image
  • Intensity                                     :               1,00,000 Lux
  • Spot Diameter                          :               100 – 150 mm
  • Depth Illumination               :               10 – 15 cm
  • Colour Temp.                           :               4000 – 4850 K
  • Colour Rendering Index     :               91 Ra
  • Focusing                                     :               Manual
  • LED Average Life                   :               >50000 Hrs
  • Number of LED                      :               57
  • Diameter of Light                  :               580mm
  • Intensity Control                   :               10~100 Digital
  • Power Supply                          :               220V/50Hz AC
  • Power Consumption           :               40 X 2 Watt
  • Special Function                   :               Memory
GM 7076 LED OT Light Ceiling 4 Reflector
GM 7076 LED OT Light Ceiling 4 Reflector Image
  • Luminance                                :               1,75,000 Lux
  • Spot Diameter                          :               100 – 180 mm
  • Depth Illumination                :               15 – 21 cm
  • Colour Temp                              :               3200-5200 K
  • Colour Rendering Index      :               91 Ra
  • Focusing                                      :               Manual
  • LED Average Life                    :               >50000 Hrs
  • Number of LED                       :               178
  • Diameter of Light                   :               693 mm
  • Intensity Control                   :               10~100 Digital
  • Power Supply                           :               220V/50Hz AC
  • Power Consumption            :               AC, 55 Watts
  • Special Function                    :               Memory
GM 7077 LED OT Light Ceiling double dome 4+4 Reflector
GM 7077 LED OT Light Ceiling double dome 4+4 Reflector Image
  • Intensity                                   :               1,25,000 Lux
  • Intensity Satellite                 :               1,25,000 Lux
  • Spot Diameter                       :               100 – 150 mm
  • Depth Illumination             :               10 – 15 cm
  • Colour Temp.                         :               4000 – 4850 K
  • Colour Rendering Index   :               91 Ra
  • Focusing                                   :               Manual
  • LED Average Life                 :               >50000 Hrs
  • Number of LED                    :               76 X 2
  • Diameter of Light                :               580mm X 2
  • Intensity Control                 :               10~100 Digital
  • Power Supply                         :               220V/50Hz AC
  • Power Consumption          :               40 X 2 Watt
  • Special Function                  :               Memory
GM 7078 LED OT Light Ceiling 4 Reflector
GM 7078 LED OT Light Ceiling 4 Reflector Image
  • Intensity                                     :               1,25,000 Lux
  • Spot Diameter                          :                100 – 150 mm
  • Depth Illumination                :               10 – 15 cm
  • Colour Temp.                            :               4000 – 4850 K
  • Colour Rendering Index      :               91 Ra
  • Focusing                                      :               Manual
  • LED Average Life                    :               >50000 Hrs
  • Number of LED                       :               76
  • Diameter of Light                   :               580mm
  • Intensity Control                    :               10~100 Digital
  • Power Supply                            :               220V/50Hz AC
  • Power Consumption             :               40Watt
  • Special Function                     :               Memory
GM 7079 LED OT Light Ceiling double dome 4+3 Reflector
GM 7079 LED OT Light Ceiling double dome 4+3 Reflector Image
  • Intensity                                     :               1,25,000 Lux
  • Intensity Satellite                   :               1,00,000 Lux
  • Spot Diameter                          :               100-150 mm
  • Depth Illumination                :               10 -15 cm
  • Colour Temp.                            :               4000 – 4850 K
  • Colour Rendering Index      :               91 Ra
  • Focusing                                      :               Manual
  • LED Average Life                    :               >50000 Hrs
  • Number of LED                        :               76 + 57
  • Diameter of Light                    :               580mm
  • Intensity Control                     :               10~100 Digital
  • Power Supply                             :               220V/50Hz AC
  • Power Consumption              :               40 X 2 Watt
  • Special Function                      :               Memory
O.T Theater Equipments
GM 7080 Monitor Trolley
GM 7080 Monitor Trolley Image
  • Overall approx. size: 800L X 600 W X 1408 H mm
  • One drawer & 4 shelves Oxygen cylinder cage & I. V. Rod
  • Mounted on 125mm dia castors
  • Switch & Socket panel for medical equipment
  • Epoxy Powder Coated/Stainless Steel
GM 7090 Operating C-Arm Table - Hydraulic
GM 7090 Operating C-Arm Table - Hydraulic Image
  • Hydraulic operated Table Having all surgical position chair, Neuro, spinal, Flex /Reflex Trendelenburg / reverse Trendelenburg, Lateral Lithology position. The eccentrical position table column and interchangeable head and leg section allow optimal use of the C-ARM image intensifier. Table height adjustable with help of hydraulic and other position with the help of smooth lever handle. The table is mounted on castors wheel with locking device. Head and leg sections are interchangeable. Base and column cover and made of stainless steel for easy cleaning. Rodio Translucent top. Stainless steel rails with clamps accepts all standard accessories

Technical  Data:

  • 185 L X 50W X 75  to  95H cm
  • Trendelenburg / Reverse 35° Lateral tilt 20° (both side) Flex / Reflex 220°

Standard Accessories:

  • Anesthetist screen, Armrest with  SS top padded Lateral Support, padded Lithotomy Crutches,  Padded shoulder support, Rubber Mattress
GM 7089 Dust Bin Small SS
GM 7089 Dust Bin Small SS Image
  • Fully joint less stainless steel from outer and plastic bucket inside
  • Foot operated
GM 7088 Scrub Station
GM 7088 Scrub Station Image
  • Scrub station wall mounted scrub Station, made of heavy duty stainless steel 304 grade designed for splash-free usage without touching the taps soap dispensers directly with the handle

Available in

  • One Bay
  • Two Bay
  • Three Bay
GM 7087 Surgeon’s Chair
GM 7087 Surgeon’s Chair Image
  • Cushioned seat and back
  • Pneumatic height adjustable
  • 5 legs base on castors
  • Height adjustable and winging Back Rest
GM 7086 Dressing Trolley
GM 7086 Dressing Trolley Image
  • Size: 76 X 51 X 90 cm
  • Tubular frame powder coated with two heavy S. S. shelves
  • Mounted as four castors 20 cm
  • Protective railing on four side on both shelves
  • Available with Bowl & Bucket
GM 7085 Instrument Trolley - 2 Shelves
GM 7085 Instrument Trolley - 2 Shelves Image
  • Overall Approximate Seat Size: 680L X 450 W X 820 H
  • Frame work of stainless steel tubes mounted on four 50 mm dia swiveling castors
  • There are 2 stainless steel shelves with three side railings on top shelf only in these instrument trolleys
  • Optional Pre-treated and epoxy powder coated
GM 7084 Mayo Instrument Trolley
GM 7084 Mayo Instrument Trolley Image
  • Approx Tray S. S . Size: 91 L X 50 W cm
  • Frame work of CRC tubes mounted on 10 cm castors
  • Height adjustable by gear handle
  • Epoxy Powder Coated / Stainless Steel Frame
GM 7083 Mayo Instrument Trolley (SS Tray)
GM 7083 Mayo Instrument Trolley (SS Tray) Image
  • Overall Size :               76L X 46W X 81H cm
  • Tray Size S.S. :               56 L X 40W cm
  • Rectangular CRC tube mounted on 5 cm castors, height adjustable by side Knob
  • Finish Pre-treatment and Epoxy Powder
  • Coated finish / Stainless Steel Frame
GM 7082 Mayo Instrument Trolley (Mechanical)
GM 7082 Mayo Instrument Trolley (Mechanical) Image
  • Approx Tray S. S. Size: 76 L X 46 W cm
  • Frame work of CRC tubes mounted on 10 cm castors
  • Height adjustable by gear handle
  • Epoxy Powder Coated / Stainless Steel Frame
GM 7081 Crash Cart
GM 7081 Crash Cart Image
  • Overall approx Size: 940L X 490W X 1535H mm
  • Six colored removable bins and 2 polystyrene lockable storage units with 3 drawers
  • 4 swivel castors,125mm dia, 2 with brake
  • Complete with corner buffers, powder coated oxygen cylinder holder, S. S., I. V. Rod, S. S. shelves, cardiac massage board and electric lamp S. S. Tubular frame
GM 7091 Operating C-Arm Table - Electric
GM 7091 Operating C-Arm Table - Electric Image

Suitable for:

  • General Surgery
  • Vascular Surgery
  • Cardiac Surgery
  • Neurology Surgery
  • Urology Surgery
  • Gynecology
  • Laparoscopy
  • Plastic Surgery

 

Standard Accessories:

  • Anesthetic Screen
  • Shoulder Supports with pad
  • Lateral Support with Pad
  • Knee Crutches
Delivery Tables / Beds
GM 8001 Obstetric Delivery Bed (2 Section Top)
GM 8001 Obstetric Delivery Bed (2 Section Top) Image
  • Approx Size: Body section: 1000L X 800W X 750H mm,
  • Leg section: 900L mm Bed, Labour and Delivery made in 2 section body section with Legs mounted on rubber tips, leg\section swivel castors with brakes
  • Leg section can be completely recessed under the body section supports for leg holder with solid mechanism to fix leg holders at requested height & width
  • Filled mattress pad and over mattress pad in 2 section
  • Supplied with 2 knee crutches adjustable in height & width
  • Knockdown construction
  • Finish: Epoxy powder coated
GM 8002 Obstetric Delivery Table (Mechanical)
GM 8002 Obstetric Delivery Table (Mechanical) Image
  • Approx. Dimensions: 72L X 22W X 30H inches
  • Three sections cushioned top
  • Backrest, seat, Leg section adjustable by hand
  • Complete with S. S. bowls
  • A Pair of knee crutches with height adjustable
  • Finish: Pre-treated & Epoxy Powder coated
GM 8003 Obstetric Delivery Bed (2 Section Top)
GM 8003 Obstetric Delivery Bed (2 Section Top) Image
  • Approx. Dimensions: 72L X 30W X 30H inches
  • Tubular frame work made in 2 section
  • Finish pre-treated & Epoxy powder coated
  • Leg section on swivel castors with brakes
  • Two section cushioned top
  • Height adjustable a pair of knee crutches
  • Pre-treated & Epoxy powder coated
GM 8004 Obstetric Delivery Table (Fixed Height)
GM 8004 Obstetric Delivery Table (Fixed Height) Image
  • Approx. Dimensions: 72L X 27W X 24 – 32 H inches
  • Tubular frame work mounted on swiveling castors
  • Stainless steel top in three sections
  • Trendlenburg positions adjustable by pneumatic gas spring system
  • Hydraulically height adjustable by foot paddle from side
  • Brackrest section adjustable on ratchet
  • Leg end section can slide under the main section
  • A Pair of knee crutches with height adjustable
  • Finish Pre-treated & Epoxy powder coated
GM 8005 Obstetric Delivery Table (Telescopic)
GM 8005 Obstetric Delivery Table (Telescopic) Image
  • Approx. Dimensions: 72L X 27W X 24 – 32H inches
  • Tubular frame work mounted on swiveling castors
  • Stainless steel top in three sections
  • Trendlenburg positions adjustable by pneumatic gas spring system
  • Hydraulically height adjustable by foot paddle from side
  • Backrests section adjustable on ratchet
  • Leg end section can slide under the main section
  • A Pair of knee crutches with height adjustable
  • Finish Pre-treated & Epoxy powder coated
GM 8006 Labour Delivery Room Bed (Electric)
GM 8006 Labour Delivery Room Bed (Electric) Image
  • Overall Size: 1880L X 900W X 600 – 800H mm
  • Tubular Frame work mounted on 125 mm dia castor two with brakes
  • Three section top made of M. S. pipe with fixed cushioned mattress
  • Trendlenburg /Reverse Trendlenburg positions, height adjustment
  • Back section adjustment through electric actuator system
  • Leg and section can slide under the main section
  • Provided with a pair of upholstery Lithonomy position
  • S. S. Telescopic I. V. Rod
  • Detachable S. S. Tray
GM 8007 Labour Delivary Room Bed (Hydraulic)
GM 8007 Labour Delivary Room Bed (Hydraulic) Image
  • AOverall Size: 1880L X 900W X 600 – 800H mm
  • Tubular Frame work mounted on 125 mm dia castor two with brakes
  • Three section top made of MS pipe with fixed Cushioned mattress
  • Trendlenburg /Reverse Trendlenburg positions, Height Adjustment
  • Back section adjustment through electric actuator system
  • Leg and section can slide under the main section
  • Provided with a pair of upholstery Lithonomy position
  • S. S. Telescopic IV Rod
  • Detachable S. S. Tray
Neonatal Equipments
GM 8021 Baby Bassinet
GM 8021 Baby Bassinet Image
  • Preprex transparent Crib with mattress, with utility box Trendlenburg / Rev. Trendlenburg
  • Laminated cupboard with plate form
  • 5 cms castors
  • I. V. Rod
  • Finish: Pre-treated and Epoxy Powder Coated
GM 8022 Baby Bassinet
GM 8022 Baby Bassinet Image
  • Preprex transparent Crib with Mattress, Stainless Steel and storage space
  • Trendlenburg / Rev. Trendlenburg
  • 5 cm Castors
  • Finish: Stainless Steel
GM 8023 Baby Cradle
GM 8023 Baby Cradle Image
  • Overall Size: 36L X 15W X 39H inches
  • M. S. Tubular pipe
  • Stand fitted with PVC Stumps
  • Wire mesh hanging cradle
  • Finish: Pre-treated and Epoxy Powder Coated
Stretchers
GM 8041 Wheelchair Stair Chair
GM 8041 Wheelchair Stair Chair Image
  • Wheelchair type stretcher, made of high-quality Aluminium alloy, it is mainly used in some areas with difficult traffic or entry such as narrow halls, gangways, cloister or stair with several turnings

Technical Parameter:

  • Folded Size                                    :               93 L  X  51 W  X  16 H  cm
  • Folded into wheelchair
  • Back height                                    :               91  cm  ( Width)  50 cm
  • Seat height                                    :               49  cm  (Width)  50 cm
  • Net Weight                                    :               8  kg
  • Dimension of the packing box  :               100 L  X  55 W  X 20 H  cm
  • Gross Weight                                :               12 kg
GM 8042 Wheelchair Stretcher with Varied Positions
GM 8042 Wheelchair Stretcher with Varied Positions Image
  • Automatic wheelchair type stretcher is mainly used to transport the sick, wounded outdoor. It’s a necessary accessory on ambulances and could be folded as wheelchair in narrow stairs or elevators. The model is made of high-quality Aluminium alloy, with characteristics such as light weight, good appearance, reasonable configuration, It has soft foam mattress on the surface and protecting blocksidely. It’s an easy operation stretcher

 

Technical Parameter:

  • Product Size                                 :               190L X 59W  X 85H cm
  • Net Weight                                   :               45 kg
  • The bearing pressure                 :               <159 kg
  • Dimension of the pkg box         :               200L  X  60W X    27H cm
  • Gross Weight                               :               55 kg
GM 8043 Scoop Stretcher - Telescopic / Imobile
GM 8043 Scoop Stretcher - Telescopic / Imobile Image
  • Product Size: 168L X 43W X 7H cm (min) 224W X 45H X 0H cm (max)
  • Net weight: 9 kg
  • Gross Weight: 11kg
  • The bearing pressure: <159 kg
  • Dimension of the packing box: 127L X 45W X10H cm
GM 8044 Folding Stretcher Canvas - 2 Fold
GM 8044 Folding Stretcher Canvas - 2 Fold Image
  • Unfolded Size :                   221L X 53W X 15H cm
  • Folded Size :                       110L X 18W X 11H cm
  • Net Wt. :                              5 kg
  • Gross Wt. :                          6 kg
  • Load Bearing Capacity :   159 kg
GM 8045 Folding Stretcher - 4 Fold
GM 8045 Folding Stretcher - 4 Fold Image
  • Aluminium folding length wise as well as width wise.
  • 4 Fold, Provided with bag
  • Overall size                         :               210L X 53W X 12H cm
  • Folded Size                         :               61L X 30W X 12H cm
  • Load Bearing Capacity    :               159 kg
GM 8046 Folding Stretcher - Canvas
GM 8046 Folding Stretcher - Canvas Image
  • M. S. Pole widthwise fold
  • Overall Size: 213L X 56W X 15H cm
  • Finish: Pre-treated and Epoxy Powder Coated
Emergency Trolley
GM 8047 Stretcher Trolley
GM 8047 Stretcher Trolley Image
  • Overall approx dimension: 2030L X 560 D X 820H mm
  • Strong construction made from MS ERW round tubes dia, without brake
  • Removable stretcher top made from M. S. sheet
  • supported on M. S. tubular frame Pre treated and powder coated finish
  • Supplied in knock down condition
  • Also available in M. S. Framework & S. S. Top
GM 8048 Stretcher Trolley
GM 8048 Stretcher Trolley Image
  • Overall approx dimension: 2030L X 560 D X 820H mm
  • Strong construction made from MS ERW round tubes dia, without brake
  • Removable stretcher top made from M. S. sheet
  • supported on M. S. tubular frame
  • Pre treated and powder coated finish
  • Supplied in knock down condition
  • Also available in M. S. Framework & S. S. Top
GM 8048 Patient Trolley with 2 Section Mattress
GM 8048 Patient Trolley with 2 Section Mattress Image

  • Overall Approx Size: 180L X 56W X 81H cm
  • Frame work made of Tubular M. S. Pipe Swing Away type Safety Side Railing, Adjustable I. V. Rod Utility Tray, Cylinder Cage Foam padded top
  • Trolley mount on 15cm Dia castors – 2 with Brakes
  • Finish: Pre-treated and Epoxy Powder Coated
GM 8049 Emergency Recovery Trolley
GM 8049 Emergency Recovery Trolley Image
  • 2 section top
  • Height adjusted by foot operated imported hydraulic
  • Pump from 660 mm to 910 mm
  • Gas spring assisted Trendlenburg /Reverse Trendlenburg positions
  • Complete with corner buffers, synthetic rubber covered handles, sliding X-ray cassette, tray, oxygen cylinder holder, S. S. telescopic
  • I. V. rod and swing away S. S. side rails
  • Pre-treated and powder coated
  • Four imported swivel castors, 15cm dia, two with total lock
  • X-ray permeable removable stretcher, backrest raised on ratchet
  • Overall approx size: 210L X 65W X 65 – 5H cm
GM 8050 Patient Trolley - Hi-Low
GM 8050 Patient Trolley - Hi-Low Image
  • Frame work made of S. S. tubes
  • Overall Size: 195L X 65W X  65 – 85H cm
  • Safety side railing, I. V. Rod Height adjustable by crank handle 15cm dia castors
  • The surface uses the high – quality leather surface intension high-density sponge, the back may need to adjust according to the patient  Applies the brake reliably
  • Finish: Pre-treated and Epoxy Powder Coated
  • Also available in M. S.
Wheel Chair
GM 8071 Invalid Wheel Chair (Foldable)
GM 8071 Invalid Wheel Chair (Foldable) Image
  • Powder coated Aluminium frame
  • Reclining high back
  • Detachable armrest
  • Elevating footrest
  • Solid rear wheel
  • Seat width: 18”
  • Color: Grey frame with back fabric
  • Size: 22”
  • Longer service life
  • Compact designs
  • Resistance against corrosion
GM 8072 Invalid Wheel Chair - Electric
GM 8072 Invalid Wheel Chair - Electric Image
  • Wheelchair Electronic with Safety Lamp
  • Adjustable Armrest Pad, Detachable Side board
  • Adjustable Angle Backrest
  • Maximum Distance covered on Single
  • Charge: 20 km
  • Speed Range: 1- 6 km/hour
  • Climbing Power: 12
  • Battery: 28 AH, 12V X 2, Charge: 20 km
  • Motor: 168W X 2
Examinations Tables
GM 8091 Examination Couch
GM 8091 Examination Couch Image
  • Overall Size: 183L X 60W X 81H cm
  • Frame work of CRC tubes
  • Leg fitted with PVC stumps
  • 5 cm foam cushioned top covered with rexine
  • Finish: Pre-treated and Epoxy Powder Coated
GM 8092 Gynaec Examination Table
GM 8092 Gynaec Examination Table Image
  • Overall Size: 180L X 60W X 46H cm
  • Frame work made of Rectangular/Square M. S. Tube
  • Back rest section adjustable on Ratchet/Lever
  • Leg fitted with PVC stumps
  • 5 cm foam cushioned top covered with rexine with Perineal cut
  • Adjustable Lithotomy poles with straps
  • Finish: Pre-treated and Epoxy Powder Coated
GM 8093 Examination Couch
GM 8093 Examination Couch Image
  • Overall Approx Size: 187L X 51W X 81H cm
  • Adjustable Backrest by gas spring system
  • 2 section Foam padded, Upholstered top
  • Provided with 3 Drawers and 3 Cabinets
  • M. S. Powder Coated
  • With Inbuilt Footstep
Hospital Furniture
GM 9001 Gynaec Examination Table (Two Sections)
GM 9001 Gynaec Examination Table (Two Sections) Image
  • Overall Size: 180L X 60W X 46H cm
  • Frame work made of Rectangular/Square M. S. Tube
  • Backrest section adjustable on Ratchet/Lever
  • Leg fitted with PVC stumps
  • 5  cm foam cushioned top covered with rexine Perineal cut
  • Adjustable lithotomy poles with straps
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9025 Case History (40 Cases)
GM 9025 Case History (40 Cases) Image
  • Overall size: 760 x 460 x 920 mm
  • Material: Full plastic stainless material, artificial Marble top
  • Double rows, 40 layers with 2drawers
  • Pull handles on both sides
  • Hold pulls on drawers
  • 4 noiseless casters, 2 front casters with brake
  • Protective corners
  • Noiseless slides for drawer
GM 9026 Case History Trolley (20 Cases)
GM 9026 Case History Trolley (20 Cases) Image
  • Overall size: 520 x 470 x 940 mm
  • Material: Full plastic stainless material, artificial Marble top
  • Single row, 20 layers with 1drawer
  • Pull handles on both sides
  • Hold pull on drawer
  • 4 noiseless casters, 2 front casters with brake
  • Protective corners
  • Noiseless slides for drawer
GM 9027 Emergency Drug Trolley
GM 9027 Emergency Drug Trolley Image
  • With 50 Compartments
  • With 20 Compartments
GM 9028 Bed Side Locker
GM 9028 Bed Side Locker Image
  • MS with Wooden Front and Top
  • Size: 385L X 410W X 840H mm
GM 9029 Anesthesia Trolley
GM 9029 Anesthesia Trolley Image
  • Finish: MS Powder Coated Front
  • Size: 660L X 505W X 1045H mm
  • Folding Try: 505L X 408W mm
GM 9030 Bed Side locker (ABS)
GM 9030 Bed Side locker (ABS) Image
  • Size: 385L X 410W X 850H mm
GM 9031 Utility Trolley - Two Shelves
GM 9031 Utility Trolley - Two Shelves Image
  • Size: 610L X 610W X 900H m
  • S. S. Shelves
  • M.S. Framework
  • 1 M.S. Drawer
  • 10 cms castors
GM 9032 ECG Trolley
GM 9032 ECG Trolley Image
  • Overall approx dimension: 880 x500 x 460
  • Tubular construction made of Stainless steel
  • Trolley mounted on four synthetic body twin wheel castors 100mm wheel dia two with brake & two without brake
  • Trolley has two shelves and one drawer on top
GM 9033 Handwash Basin Stand - Double Basin
GM 9033 Handwash Basin Stand - Double Basin Image
  • Five legs base mounted on 5 cm dia castors with two appox 35 cm S. S. Basin
  • Finish: Pre-treated and Epoxy Powder Coated framewith S. S. Basin
GM 9034 Handwash Basin Stand - Single Basin
GM 9034 Handwash Basin Stand - Single Basin Image
  • Five legs base mounted on  5 cm dia castors with one appox 35 cm S. S. Basin
  • Finish: Pre-treated and Epoxy Powder Coated frame with stainless steel Basin
GM 9024 Bed Side locker (Deluxe)
GM 9024 Bed Side locker (Deluxe) Image
  • Overall Size: 16 L X  16W  X  32 H  inches CRCA sheet  constructions having one Box and one drawer
  • S. S. Top with three Side raise edges
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9023 Bed Side locker (ABS)
GM 9023 Bed Side locker (ABS) Image
  • Material: ABS engineering plastic
  • Towel rack and hooks on both side to hold light things
  • Extendable table board, adjustable laminates in the cabinet
GM 9022 Filing Cabinet
GM 9022 Filing Cabinet Image
  • Overall Size:  460  X  440  X  780 mm
  • The cabinet  is  made  of one shot  Molding  ABS engineering hard  plastic,  anti-aging, anti-rust
GM 9002 Examination Couch
GM 9002 Examination Couch Image
  • Approx Dimensions: 72L X 24W X 32H inches
  • Frame work Rectangular & Square Steel tubes
  • Adjustable Back Rest by hand lever 2 Section Cushioned top
  • Leg fitted on PVC stands
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9003 Led X-ray View Box
GM 9003 Led X-ray View Box Image
  • A             –              For four film
  • B             –              For three film
  • C             –              For two film
  • D –              For one film
GM 9004 Visitor’s Stools
GM 9004 Visitor’s Stools Image
  • M. S. Tubular frame fitted with PVC stump
  • CRC Sheet duly double press bent
  • Overall Size: 12 X 12 X 20 inches
  • Finish: Pre -treated and Epoxy Powder Coated
GM 9005 Foot Step
GM 9005 Foot Step Image

Single  Step:

  • Step Size: 505L X 305W X230H mm Step made of CRCA sheet fitted with Aluminium tread flats by pop rivets
  • Frame made of 1X18G X CRC tubes fitted with PVC stumps
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9005A Double Step:
GM 9005A Double Step: Image
  • Step size: 505 L X 305 W mm
  • First Step: 230H mm
  • Second Step size: 450H mm
  • Step made of CRCA sheet fitted with Aluminium tread flats by pop rivets
  • Frame made of 1 X 18G X CRC tubes fitted with PVC stumps
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9006 Patient’s Stool Revolving Cushion Top
GM 9006 Patient’s Stool Revolving Cushion Top Image
  • Tubular four legs base with chrome plated foot ring Cushioned seat
  • Adjustable of height by an accurately machined screw
  • Finish in Epoxy Powder Coated
GM 9007 Lab Technician Stool Cushion Top
GM 9007 Lab Technician Stool Cushion Top Image
  • Height adjustable
  • Cushioned seat
  • 5 legs base on castors
GM 9008 Patient’s Stool Revolving S. S. Top
GM 9008 Patient’s Stool Revolving S. S. Top Image
  • Tubular four legs base
  • S. S. Top
  • Adjustable of height by an accurately machined screw
  • Finish in S. S.
GM 9009 Patient’s Stool Revolving S. S. Top
GM 9009 Patient’s Stool Revolving S. S. Top Image
  • Tubular four legs base with chrome plated foot ring
  • Top of stainless steel
  • Adjustable of height by an accurately machined screw
  • Finish in Epoxy Powder Coated
GM 9021 Bed Side locker(Standard)
GM 9021 Bed Side locker(Standard) Image
  • Overall Size:16 L X 16 W X32 H inches
  • Tubular pipe construction fitted PVC stumps assembled to M.S. Cupboard
  • Stainless steel top
  • Finish: Pre-treated and Epoxy Powder Coated
GM 9035 Saline Stand
GM 9035 Saline Stand Image
  • 5 Pronged base fitted with 5cm dia castor
  • 12 mm S. S. Adjustable double hook I. V. Rod.
  • To hold I. V. Rod at one fixed height by knob

A – Plastic Base with M.S./S.S. pipe

B – S. S. Base  with  S. S. pipe

C – M. S.  base  with  M. S. pipe

Hospital Beds
ICU Bed - Electric (GM 7000 A) Image
ICU Bed - Electric (GM 7000 A)
Frame work made of Rectangular M. S. Tube ABS Mattress platform in four sections Backrest, Kneerest, TB/ RTB and Hi-Low positions Obtained by hand remote system and nurse panel ABS mounted head a... Read More
ICU Bed - Electric (ABS Panels & ABS Side Railings)(GM 7001) Image
ICU Bed - Electric (ABS Panels & ABS Side Railings)(GM 7001)
Advance linear actuator system (04 Pcs Motor, 01 Pc Control box, 01 Pc Handset) Four Pieces individual ABS Molded Side-railings ABS Molded Head and Foot Panel with locking and corner buffer Framework Made... Read More
ICU Bed - Electric (Economy Model) - GM 7002 Image
ICU Bed - Electric (Economy Model) - GM 7002
ABS Molded Head & Foot Bows Four Independent Electric Motors Collapsible Side rails with Safety Lock 4 Section Perforated CRC Sheet Removal and Lockout ABS Head & Foot Board Moun... Read More
Semi Fowler Bed (Deluxe) (GM 7013) Image
Semi Fowler Bed (Deluxe) (GM 7013)
Frame work made of Rectangular M.S. Tube 2 Section Top made of Perforated M. S. Sheet Backrest, Section Maneuver by screw Handle from Foot end SS Head & Foot Bow with Laminated Panels 4 Locat... Read More
ICU Bed - Semi Electric (GM 7000) Image
ICU Bed - Semi Electric (GM 7000)
Four Pieces individual side-rails, ABS Molded ABS Head and Foot Panel with locking and corner buffer Framework Made-u... Read More
GM 7015 Hospital Semi Fowler Bed (Standard) Image
GM 7015 Hospital Semi Fowler Bed (Standard)
Frame work made of Rectangular/Square M. S. Tube 2 Section Top made of Perforated CRCA M. S. Sheet Backrest, Section Maneuver by screw           Handle from Foot end Tubular Head & Foot Bows of unequal height... Read More
GM 7016 Ortho Bed Image
GM 7016 Ortho Bed
Size: 2030L X 900 W X 530Hmm Operated by screw mechanism Two section foot end Fully stainless steel Provision for I. V. Pole Urine bag hook provision on both side with head-up position (... Read More
GM 7017 Hospital Bed Plain Image
GM 7017 Hospital Bed Plain
Frame work made of Rectangular/Square M. S. Tube Top made of perforated CRCA MS sheet Tubular Head & Foot Bows of equal height 4 Locations for I. V. Rod Overall Size: 206L X 90W X 60Hcm ... Read More
GM 7018 Hospital Bed Pediatric Image
GM 7018 Hospital Bed Pediatric
Main frame of rectangular pipe Perforated CRCA sheet top Tubular head & foot bow of equal height with vertical tube supports on PVC stumps Size: 206L X 90W X 60Hcm Finish: Pre-treated & E... Read More
GM 7031 Luxurious Accompanier’s Chair Image
GM 7031 Luxurious Accompanier’s Chair
Overall Size: Chair Position: 770 X 680 X 1125 mm Bed Position: 2050 X 680 X 550 mm Mild steel tubular frame work mounted Easily convertible to chair Castors to facilitate couch position High qua... Read More
GM 7032 Attendant Bed Cum Chair Image
GM 7032 Attendant Bed Cum Chair
MS Tubular frame work mounted on PVC stumps Pull-Out Design for Easy Transforming Recliner into Bed Overall Size: 188L x 50L x 40H cm Finish: Pre-treated & Epoxy Powder Coated
Hospital Bed Semi Fowler (ABS Panel) (GM 7012) Image
Hospital Bed Semi Fowler (ABS Panel) (GM 7012)
Frame work made of Rectangular M. S. Tube 2 Section Top made of Perforated M. S. Sheet Backrest, Section Maneuver by screw Handle from Foot end ABS Mounted Head & Foot Panels 4 Locations for ... Read More
Hospital Bed Fowler (S. S. Bows) (GM 7011) Image
Hospital Bed Fowler (S. S. Bows) (GM 7011)
Frame work made of Rectangular M. S. Tube 4 Section Top made of Perforated M. S. Sheet Detachable S. S. Head and Foot Bow fitted with laminated panels Telescopic I. V. Rod with 4 Locations Bed Mo... Read More
ICU Bed - Semi Electric (GM 7003) Image
ICU Bed - Semi Electric (GM 7003)
Four Pieces individual side-rails, ABS Molded ABS Head and Foot Panel with locking and corner buffer Framework Made-up of M.S. Tubes 4-Section Top made Oval perforated CRCA M.S. Sheet Bed Mounted... Read More
ICU Bed Electric (ABS Panels & ABS Side Railings)-GM 7004 Image
ICU Bed Electric (ABS Panels & ABS Side Railings)-GM 7004
Advance Linear Actuator system 04 Pcs Motor, 01 Pc Control Box, 01 Pc Handset Four Pieces individual side rails, ABS Molded ABS Molded Head and Foot panel with locking and corner buffer Frame work made of... Read More
Hospital Fowler Bed (Electric) (GM 7005) Image
Hospital Fowler Bed (Electric) (GM 7005)
Advance linear actuator system 4 set individual detachable ABS side railings ABS Molded Head and Foot Panel with locking Framework Made-up of M. S. Tubes 4 section top made-up of Oval perforated ... Read More
ICU Bed - Mechanical, 4 Functions (GM 7006) Image
ICU Bed - Mechanical, 4 Functions (GM 7006)
Framework made of Rectangular M. S. Tube Section Top made of Perforated M. S. Sheet Maneuvered by Separate screw from Foot end ABS mounted head and foot panels ABS tuck away safety side Railings... Read More
ICU Bed - Mechanical (ABS Panels, Collapsible Railing) (GM 7007) Image
ICU Bed - Mechanical (ABS Panels, Collapsible Railing) (GM 7007)
Collapsible Side rails with Safety Lock 4-Section Perforated CRC Sheet Removal and Lockout ABS Head & Foot Board Mounted on 125mm Dia castor with brakes ABS Corner Bumper Drainage Ba... Read More
ICU Bed - Mechanical (Economy Model, S. S. Bows) (GM 7008) Image
ICU Bed - Mechanical (Economy Model, S. S. Bows) (GM 7008)
Overall approx Size: 2100L x 900W x 600-800H mm Framework made of Rectangular M. S. Tube Stainless Steel Head & Foot Bows with Laminated Panels Aluminum Collapsible Safety side railings Teles... Read More
Hospital Bed Fowler (ABS Panels & ABS Side Railing)(GM 7009) Image
Hospital Bed Fowler (ABS Panels & ABS Side Railing)(GM 7009)
Framework made of Rectangular M. S. Tube 4 Section Top made of Perforated M. S. Sheet Backrest & Knee rest ABS mounted head and foot panels ABS tuck away safety side Railings Telesco... Read More
ICU Bed Fowler (ABS Panels) (GM 7010) Image
ICU Bed Fowler (ABS Panels) (GM 7010)
Frame work made of Rectangular M. S. Tube 4 Section Top made of Perforated M. S. Sheet Backrest, Kneerest, Positions Maneuvered by Separate screw from Foot End ABS mounted head and foot panels Te... Read More
GM 7033 Attendant Bed Image
GM 7033 Attendant Bed
Frame work made of Rectangular / Square M. S. Tube 5 cm Foam Padded top covered with rexine Leg fitted with PVC stumps Overall Size: 180L X 60W X 46H cm Finish: Pre-treated Epoxy powder Coated... Read More
Hospital Bed Accessories
GM 7051 Mosquito Net Poles Image
GM 7051 Mosquito Net Poles
4 Vertical M. S. Tube of 19 mm 2 Longitudinal & Two transverse Tubes of 5.8 mm knocked down condition Pre-treated and Epoxy Powder Coated
GM 7052 Mattress for Hospital Bed Image
GM 7052 Mattress for Hospital Bed
10 cm thick, 32/40 density foam mattress covered with rexine closed with zip at one end A –  Single mattress for plain beds B –  Two section mattress for Semi-Fowler beds C –  Three ... Read More
GM 7053 ABS Tuck Away Railings Image
GM 7053 ABS Tuck Away Railings
Comes in durable ABS material finish and provides for enhanced interior safety support as well as add to the decor needs of the surrounding decor
GM 7054 IV Rod For Hospital Bed Image
GM 7054 IV Rod For Hospital Bed
A telescopic stainless steel infusion stand with a range of height adjustable from 110 to 195 cm, adapted for insertion in to the  lifting pole holder at the head end of the bed Can be locked to prevent unwanted rotating... Read More
GM 7055 Lifting Pole Image
GM 7055 Lifting Pole
S. S. Tubular pole fitted with hand grip Easy fitted back side of the head bow Pole can be mounted on either side of the bed and allows the occupant to reposition  
GM 7056 Collapsible Side Railings Image
GM 7056 Collapsible Side Railings
M. S.  Tubular  constructions Two  S.  S.  Rod  of  side  inside  M.  S.  Bushes,  lockable with  knob  Pre- treated
O.T Lights
GM 7071 Light Single Dome 4 Reflector Image
GM 7071 Light Single Dome 4 Reflector
Luminance                                 :               1,25,000 Lux Spot Diameter                           :               100 – 150 mm Depth Illu... Read More
GM 7072 Light Single Dome 3 Reflector Image
GM 7072 Light Single Dome 3 Reflector
Luminance                          :               1,00,000 Lux Spot Diameter                   :               100 – 180 mm Depth Illumin... Read More
GM 7073 Light Single Dome 3 Reflector Image
GM 7073 Light Single Dome 3 Reflector
Luminance                                    :               1,50,000 Lux Spot Diameter                              :               100 – 180 mm Dept... Read More
GM 7074 Led Examination Light Image
GM 7074 Led Examination Light
Luminance                              :               45,000 Lux Spot Diameter                        :               100 – 180 mm Depth Illumination ?... Read More
GM 7075 LED OT Light Ceiling 3 Reflector Image
GM 7075 LED OT Light Ceiling 3 Reflector
Intensity                                     :               1,00,000 Lux Spot Diameter                          :               100 – 150 mm Depth... Read More
GM 7076 LED OT Light Ceiling 4 Reflector Image
GM 7076 LED OT Light Ceiling 4 Reflector
Luminance                                :               1,75,000 Lux Spot Diameter                          :               100 – 180 mm Depth Illumi... Read More
GM 7077 LED OT Light Ceiling double dome 4+4 Reflector Image
GM 7077 LED OT Light Ceiling double dome 4+4 Reflector
Intensity                                   :               1,25,000 Lux Intensity Satellite                 :               1,25,000 Lux Spot Diameter      ... Read More
GM 7078 LED OT Light Ceiling 4 Reflector Image
GM 7078 LED OT Light Ceiling 4 Reflector
Intensity                                     :               1,25,000 Lux Spot Diameter                          :                100 – 150 mm Dep... Read More
GM 7079 LED OT Light Ceiling double dome 4+3 Reflector Image
GM 7079 LED OT Light Ceiling double dome 4+3 Reflector
Intensity                                     :               1,25,000 Lux Intensity Satellite                   :               1,00,000 Lux Spot Diameter  ... Read More
O.T Theater Equipments
GM 7080 Monitor Trolley Image
GM 7080 Monitor Trolley
Overall approx. size: 800L X 600 W X 1408 H mm One drawer & 4 shelves Oxygen cylinder cage & I. V. Rod Mounted on 125mm dia castors Switch & Socket panel for medical equipment Epoxy P... Read More
GM 7090 Operating C-Arm Table - Hydraulic Image
GM 7090 Operating C-Arm Table - Hydraulic
Hydraulic operated Table Having all surgical position chair, Neuro, spinal, Flex /Reflex Trendelenburg / reverse Trendelenburg, Lateral Lithology position. The eccentrical position table column and interchangeable head and leg sect... Read More
GM 7089 Dust Bin Small SS Image
GM 7089 Dust Bin Small SS
Fully joint less stainless steel from outer and plastic bucket inside Foot operated
GM 7088 Scrub Station Image
GM 7088 Scrub Station
Scrub station wall mounted scrub Station, made of heavy duty stainless steel 304 grade designed for splash-free usage without touching the taps soap dispensers directly with the handle Available in One Ba... Read More
GM 7087 Surgeon’s Chair Image
GM 7087 Surgeon’s Chair
Cushioned seat and back Pneumatic height adjustable 5 legs base on castors Height adjustable and winging Back Rest
GM 7086 Dressing Trolley Image
GM 7086 Dressing Trolley
Size: 76 X 51 X 90 cm Tubular frame powder coated with two heavy S. S. shelves Mounted as four castors 20 cm Protective railing on four side on both shelves Available with Bowl & Bucket ... Read More
GM 7085 Instrument Trolley - 2 Shelves Image
GM 7085 Instrument Trolley - 2 Shelves
Overall Approximate Seat Size: 680L X 450 W X 820 H Frame work of stainless steel tubes mounted on four 50 mm dia swiveling castors There are 2 stainless steel shelves with three side railings on top shelf only in... Read More
GM 7084 Mayo Instrument Trolley Image
GM 7084 Mayo Instrument Trolley
Approx Tray S. S . Size: 91 L X 50 W cm Frame work of CRC tubes mounted on 10 cm castors Height adjustable by gear handle Epoxy Powder Coated / Stainless Steel Frame
GM 7083 Mayo Instrument Trolley (SS Tray) Image
GM 7083 Mayo Instrument Trolley (SS Tray)
Overall Size :               76L X 46W X 81H cm Tray Size S.S. :               56 L X 40W cm Rectangular CRC tube mounted on 5 cm castors, height adjustable by side Knob Finish P... Read More
GM 7082 Mayo Instrument Trolley (Mechanical) Image
GM 7082 Mayo Instrument Trolley (Mechanical)
Approx Tray S. S. Size: 76 L X 46 W cm Frame work of CRC tubes mounted on 10 cm castors Height adjustable by gear handle Epoxy Powder Coated / Stainless Steel Frame
GM 7081 Crash Cart Image
GM 7081 Crash Cart
Overall approx Size: 940L X 490W X 1535H mm Six colored removable bins and 2 polystyrene lockable storage units with 3 drawers 4 swivel castors,125mm dia, 2 with brake Complete with corner buffers, powder... Read More
GM 7091 Operating C-Arm Table - Electric Image
GM 7091 Operating C-Arm Table - Electric
Suitable for: General Surgery Vascular Surgery Cardiac Surgery Neurology Surgery Urology Surgery Gynecology Laparoscopy Plastic Surgery   ... Read More
Delivery Tables / Beds
GM 8001 Obstetric Delivery Bed (2 Section Top) Image
GM 8001 Obstetric Delivery Bed (2 Section Top)
Approx Size: Body section: 1000L X 800W X 750H mm, Leg section: 900L mm Bed, Labour and Delivery made in 2 section body section with Legs mounted on rubber tips, leg\section swivel castors with brakes Leg section ... Read More
GM 8002 Obstetric Delivery Table (Mechanical) Image
GM 8002 Obstetric Delivery Table (Mechanical)
Approx. Dimensions: 72L X 22W X 30H inches Three sections cushioned top Backrest, seat, Leg section adjustable by hand Complete with S. S. bowls A Pair of knee crutches with height adjustable... Read More
GM 8003 Obstetric Delivery Bed (2 Section Top) Image
GM 8003 Obstetric Delivery Bed (2 Section Top)
Approx. Dimensions: 72L X 30W X 30H inches Tubular frame work made in 2 section Finish pre-treated & Epoxy powder coated Leg section on swivel castors with brakes Two section cushioned top... Read More
GM 8004 Obstetric Delivery Table (Fixed Height) Image
GM 8004 Obstetric Delivery Table (Fixed Height)
Approx. Dimensions: 72L X 27W X 24 – 32 H inches Tubular frame work mounted on swiveling castors Stainless steel top in three sections Trendlenburg positions adjustable by pneumatic gas spring syste... Read More
GM 8005 Obstetric Delivery Table (Telescopic) Image
GM 8005 Obstetric Delivery Table (Telescopic)
Approx. Dimensions: 72L X 27W X 24 – 32H inches Tubular frame work mounted on swiveling castors Stainless steel top in three sections Trendlenburg positions adjustable by pneumatic gas spring system... Read More
GM 8006 Labour Delivery Room Bed (Electric) Image
GM 8006 Labour Delivery Room Bed (Electric)
Overall Size: 1880L X 900W X 600 – 800H mm Tubular Frame work mounted on 125 mm dia castor two with brakes Three section top made of M. S. pipe with fixed cushioned mattress Trendlenburg /Reverse Tr... Read More
GM 8007 Labour Delivary Room Bed (Hydraulic) Image
GM 8007 Labour Delivary Room Bed (Hydraulic)
AOverall Size: 1880L X 900W X 600 – 800H mm Tubular Frame work mounted on 125 mm dia castor two with brakes Three section top made of MS pipe with fixed Cushioned mattress Trendlenburg /Reverse Tren... Read More
Neonatal Equipments
GM 8021 Baby Bassinet Image
GM 8021 Baby Bassinet
Preprex transparent Crib with mattress, with utility box Trendlenburg / Rev. Trendlenburg Laminated cupboard with plate form 5 cms castors I. V. Rod Finish: Pre-treated and Epoxy Powder Coated... Read More
GM 8022 Baby Bassinet Image
GM 8022 Baby Bassinet
Preprex transparent Crib with Mattress, Stainless Steel and storage space Trendlenburg / Rev. Trendlenburg 5 cm Castors Finish: Stainless Steel
GM 8023 Baby Cradle Image
GM 8023 Baby Cradle
Overall Size: 36L X 15W X 39H inches M. S. Tubular pipe Stand fitted with PVC Stumps Wire mesh hanging cradle Finish: Pre-treated and Epoxy Powder Coated
Stretchers
GM 8041 Wheelchair Stair Chair Image
GM 8041 Wheelchair Stair Chair
Wheelchair type stretcher, made of high-quality Aluminium alloy, it is mainly used in some areas with difficult traffic or entry such as narrow halls, gangways, cloister or stair with several turnings Technical Parame... Read More
GM 8042 Wheelchair Stretcher with Varied Positions Image
GM 8042 Wheelchair Stretcher with Varied Positions
Automatic wheelchair type stretcher is mainly used to transport the sick, wounded outdoor. It’s a necessary accessory on ambulances and could be folded as wheelchair in narrow stairs or elevators. The model is made of high-qu... Read More
GM 8043 Scoop Stretcher - Telescopic / Imobile Image
GM 8043 Scoop Stretcher - Telescopic / Imobile
Product Size: 168L X 43W X 7H cm (min) 224W X 45H X 0H cm (max) Net weight: 9 kg Gross Weight: 11kg The bearing pressure: <159 kg Dimension of the packing box: 127L X 45W X10H cm
GM 8044 Folding Stretcher Canvas - 2 Fold Image
GM 8044 Folding Stretcher Canvas - 2 Fold
Unfolded Size :                   221L X 53W X 15H cm Folded Size :                       110L X 18W X 11H cm Net Wt. :                              5 kg Gross Wt. :   ... Read More
GM 8045 Folding Stretcher - 4 Fold Image
GM 8045 Folding Stretcher - 4 Fold
Aluminium folding length wise as well as width wise. 4 Fold, Provided with bag Overall size                         :               210L X 53W X 12H cm Folded Size ?... Read More
GM 8046 Folding Stretcher - Canvas Image
GM 8046 Folding Stretcher - Canvas
M. S. Pole widthwise fold Overall Size: 213L X 56W X 15H cm Finish: Pre-treated and Epoxy Powder Coated
Emergency Trolley
GM 8047 Stretcher Trolley Image
GM 8047 Stretcher Trolley
Overall approx dimension: 2030L X 560 D X 820H mm Strong construction made from MS ERW round tubes dia, without brake Removable stretcher top made from M. S. sheet supported on M. S. tubular frame Pre tre... Read More
GM 8048 Stretcher Trolley Image
GM 8048 Stretcher Trolley
Overall approx dimension: 2030L X 560 D X 820H mm Strong construction made from MS ERW round tubes dia, without brake Removable stretcher top made from M. S. sheet supported on M. S. tubular frame ... Read More
GM 8049 Emergency Recovery Trolley Image
GM 8049 Emergency Recovery Trolley
2 section top Height adjusted by foot operated imported hydraulic Pump from 660 mm to 910 mm Gas spring assisted Trendlenburg /Reverse Trendlenburg positions Complete with corner buffers, synthet... Read More
GM 8050 Patient Trolley - Hi-Low Image
GM 8050 Patient Trolley - Hi-Low
Frame work made of S. S. tubes Overall Size: 195L X 65W X  65 – 85H cm Safety side railing, I. V. Rod Height adjustable by crank handle 15cm dia castors The surface uses the high – quality le... Read More
Wheel Chair
GM 8071 Invalid Wheel Chair (Foldable) Image
GM 8071 Invalid Wheel Chair (Foldable)
Powder coated Aluminium frame Reclining high back Detachable armrest Elevating footrest Solid rear wheel Seat width: 18” Color: Grey frame with back fabric Size: 22?... Read More
GM 8072 Invalid Wheel Chair - Electric Image
GM 8072 Invalid Wheel Chair - Electric
Wheelchair Electronic with Safety Lamp Adjustable Armrest Pad, Detachable Side board Adjustable Angle Backrest Maximum Distance covered on Single Charge: 20 km Speed Range: 1- 6 km/hour... Read More
Examinations Tables
GM 8091 Examination Couch Image
GM 8091 Examination Couch
Overall Size: 183L X 60W X 81H cm Frame work of CRC tubes Leg fitted with PVC stumps 5 cm foam cushioned top covered with rexine Finish: Pre-treated and Epoxy Powder Coated
GM 8092 Gynaec Examination Table Image
GM 8092 Gynaec Examination Table
Overall Size: 180L X 60W X 46H cm Frame work made of Rectangular/Square M. S. Tube Back rest section adjustable on Ratchet/Lever Leg fitted with PVC stumps 5 cm foam cushioned top covered with re... Read More
GM 8093 Examination Couch Image
GM 8093 Examination Couch
Overall Approx Size: 187L X 51W X 81H cm Adjustable Backrest by gas spring system 2 section Foam padded, Upholstered top Provided with 3 Drawers and 3 Cabinets M. S. Powder Coated With I... Read More
Hospital Furniture
GM 9001 Gynaec Examination Table (Two Sections) Image
GM 9001 Gynaec Examination Table (Two Sections)
Overall Size: 180L X 60W X 46H cm Frame work made of Rectangular/Square M. S. Tube Backrest section adjustable on Ratchet/Lever Leg fitted with PVC stumps 5  cm foam cushioned top covered with r... Read More
GM 9025 Case History (40 Cases) Image
GM 9025 Case History (40 Cases)
Overall size: 760 x 460 x 920 mm Material: Full plastic stainless material, artificial Marble top Double rows, 40 layers with 2drawers Pull handles on both sides Hold pulls on drawers 4 ... Read More
GM 9026 Case History Trolley (20 Cases) Image
GM 9026 Case History Trolley (20 Cases)
Overall size: 520 x 470 x 940 mm Material: Full plastic stainless material, artificial Marble top Single row, 20 layers with 1drawer Pull handles on both sides Hold pull on drawer 4 nois... Read More
GM 9027 Emergency Drug Trolley Image
GM 9027 Emergency Drug Trolley
With 50 Compartments With 20 Compartments
GM 9028 Bed Side Locker Image
GM 9028 Bed Side Locker
MS with Wooden Front and Top Size: 385L X 410W X 840H mm
GM 9029 Anesthesia Trolley Image
GM 9029 Anesthesia Trolley
Finish: MS Powder Coated Front Size: 660L X 505W X 1045H mm Folding Try: 505L X 408W mm
GM 9030 Bed Side locker (ABS) Image
GM 9030 Bed Side locker (ABS)
Size: 385L X 410W X 850H mm
GM 9031 Utility Trolley - Two Shelves Image
GM 9031 Utility Trolley - Two Shelves
Size: 610L X 610W X 900H m S. S. Shelves M.S. Framework 1 M.S. Drawer 10 cms castors
GM 9032 ECG Trolley Image
GM 9032 ECG Trolley
Overall approx dimension: 880 x500 x 460 Tubular construction made of Stainless steel Trolley mounted on four synthetic body twin wheel castors 100mm wheel dia two with brake & two without brake Troll... Read More
GM 9033 Handwash Basin Stand - Double Basin Image
GM 9033 Handwash Basin Stand - Double Basin
Five legs base mounted on 5 cm dia castors with two appox 35 cm S. S. Basin Finish: Pre-treated and Epoxy Powder Coated framewith S. S. Basin
GM 9034 Handwash Basin Stand - Single Basin Image
GM 9034 Handwash Basin Stand - Single Basin
Five legs base mounted on  5 cm dia castors with one appox 35 cm S. S. Basin Finish: Pre-treated and Epoxy Powder Coated frame with stainless steel Basin
GM 9024 Bed Side locker (Deluxe) Image
GM 9024 Bed Side locker (Deluxe)
Overall Size: 16 L X  16W  X  32 H  inches CRCA sheet  constructions having one Box and one drawer S. S. Top with three Side raise edges Finish: Pre-treated and Epoxy Powder Coated
GM 9023 Bed Side locker (ABS) Image
GM 9023 Bed Side locker (ABS)
Material: ABS engineering plastic Towel rack and hooks on both side to hold light things Extendable table board, adjustable laminates in the cabinet
GM 9022 Filing Cabinet Image
GM 9022 Filing Cabinet
Overall Size:  460  X  440  X  780 mm The cabinet  is  made  of one shot  Molding  ABS engineering hard  plastic,  anti-aging, anti-rust
GM 9002 Examination Couch Image
GM 9002 Examination Couch
Approx Dimensions: 72L X 24W X 32H inches Frame work Rectangular & Square Steel tubes Adjustable Back Rest by hand lever 2 Section Cushioned top Leg fitted on PVC stands Finish: Pre-treated a... Read More
GM 9003 Led X-ray View Box Image
GM 9003 Led X-ray View Box
A             –              For four film B             –              For three film C             –              For tw... Read More
GM 9004 Visitor’s Stools Image
GM 9004 Visitor’s Stools
M. S. Tubular frame fitted with PVC stump CRC Sheet duly double press bent Overall Size: 12 X 12 X 20 inches Finish: Pre -treated and Epoxy Powder Coated
GM 9005 Foot Step Image
GM 9005 Foot Step
Single  Step: Step Size: 505L X 305W X230H mm Step made of CRCA sheet fitted with Aluminium tread flats by pop rivets Frame made of 1X18G X CRC tubes fitted with PVC stumps Finish: Pre-treated and Epoxy Po... Read More
GM 9005A Double Step: Image
GM 9005A Double Step:
Step size: 505 L X 305 W mm First Step: 230H mm Second Step size: 450H mm Step made of CRCA sheet fitted with Aluminium tread flats by pop rivets Frame made of 1 X 18G X CRC tubes fitted with PVC... Read More
GM 9006 Patient’s Stool Revolving Cushion Top Image
GM 9006 Patient’s Stool Revolving Cushion Top
Tubular four legs base with chrome plated foot ring Cushioned seat Adjustable of height by an accurately machined screw Finish in Epoxy Powder Coated
GM 9007 Lab Technician Stool Cushion Top Image
GM 9007 Lab Technician Stool Cushion Top
Height adjustable Cushioned seat 5 legs base on castors
GM 9008 Patient’s Stool Revolving S. S. Top Image
GM 9008 Patient’s Stool Revolving S. S. Top
Tubular four legs base S. S. Top Adjustable of height by an accurately machined screw Finish in S. S.
GM 9009 Patient’s Stool Revolving S. S. Top Image
GM 9009 Patient’s Stool Revolving S. S. Top
Tubular four legs base with chrome plated foot ring Top of stainless steel Adjustable of height by an accurately machined screw Finish in Epoxy Powder Coated
GM 9021 Bed Side locker(Standard) Image
GM 9021 Bed Side locker(Standard)
Overall Size:16 L X 16 W X32 H inches Tubular pipe construction fitted PVC stumps assembled to M.S. Cupboard Stainless steel top Finish: Pre-treated and Epoxy Powder Coated
GM 9035 Saline Stand Image
GM 9035 Saline Stand
5 Pronged base fitted with 5cm dia castor 12 mm S. S. Adjustable double hook I. V. Rod. To hold I. V. Rod at one fixed height by knob A – Plastic Base with M.S./S.S. pipe B – S. S.... Read More

Translate »